◆Hybrid Analog & DMR Repeater
◆Make Communication Faster
◆High-quality Sound, Stable and Durable
◆Ultra-quiet Fan, Multi-blade, Good Great Dissipation Performance
◆Analog & Digital Signal Auto Switch
◆Dual Antenna Interface More Practical
◆Capable of TX and RX simultaneously
◆Rugged & Compact Metal Box
◆VHF:40W UHF:30W, High-power Transmission Longer Distance
◆55 Channels
◆2 Time Slot
◆Channel Spacing for Analog:12.5/25KHz, Digital:12.5KHz
◆Built-in CTCSS/DCS Encode & Decode
◆Equipped with input and output ACC port, Connected to Various Control Terminals
◆Support External 13.8V DC Power Supply
◆Remote Control ON/OFF of Repeater by DTMF(only analog mode)
◆Change Channel No. by Remote DTMF Control(only analog mode)
◆Applicable to Various Scenarios

General

Frequency Range

Version A:136-174 MHz
Version B:350-380 MHz
Version C:400-470 MHz

Channel Capacity

55

Antenna connector type

SO-239

Channel Spacing

12.5/25kHz

Frequency Stability

±1.0PPM

Operating Voltage

AC:110V～220V
DC :13.8V

Dimensions (ex ant, H×W×D)

482x132x287 mm

Weight

About 12kgs

Transmitter

Output Power

VHF:1-40W
UHF:1-30W

Analog FM Modulation

12.5 kHz: 11K0F3E
25 kHz: 16K0F3E

Digital 4FSK Modulation

12.5 kHz data:7K60FXD
12.5 kHz data & voice:7K60FXE

Conducted/Radiated Emission

-36dbm＜1GHZ
-30dbm＞1GHZ

Modulation Limiting

±5kHz@25KHz
±2.5kHz@12.5KHz

FM Hum & Noise

55DB@25KHz
50DB@12.5KHz

Audio Response

＋1dB～－3dB

Modulation Distortion

≤5%

Digital Vocoder Type

AMBE+2

Digital Protocol

ETSI-TS102 361-1

Carrier Frequency Tolerance

±500Hz

Receiver

Sensitivity(Analog)

0.22μV@25KHz(12dB SINAD)
0.35μV@12.5KHz(12dB SINAD)

Selectivity(Digital)

0.35μV@12.5KHz

Adjacent Channel Selectivity

VHF:83dB(25KHz)/77dB(12.5KHz)

UHF:80dB(25KHz)/74dB(12.5KHz)

Inter Modulation Response Rejection

72dB

Rated Audio Distortion

≤5%

Bit Error Ratio(BER)

≤5%

NOTE:

1.All specifications are subject to change without notice due to continuous development.