 |
2 Programming Key |
¡¡ |
 |
Monitor |
| ¡¡ |
You can program or assign to
perform a user specific function. Personalize the
required functions for convenient and quick operation. |
¡¡ |
¡¡ |
This feature allows you to
check if a channel is clear before you transmit. |
 |
Channel Step |
¡¡ |
 |
Scan |
| ¡¡ |
Channel refers to the
frequency value occupied when transmitting and
receiving. |
¡¡ |
¡¡ |
The channel scan feature
enables a two way radio to continuously scan each
channel for activity. |
 |
Hands-Free VOX |
¡¡ |
 |
Power Adjustable |
| ¡¡ |
This hands-free feature
allows you to get on with other manual tasks while you
stay in touch with other users. |
¡¡ |
¡¡ |
This feature allows you to
switch between high and low power modes on the radio.
|
 |
Wide/Narrow Band |
¡¡ |
 |
Battery Saver |
| ¡¡ |
Narrowband takes up less
frequency space and lowers the chance for interference,
wideband channels can carry more infos but require more
power. |
¡¡ |
¡¡ |
The radio will switch to
automatically after being left unused for a certain
amount of time, lessens the drain on your battery and
makes it last longer. |
 |
Busy Channel Lockout |
¡¡ |
 |
Time-out Timer |
| ¡¡ |
This feature keeps
communication lines open by preventing radios from
listening or transmitting through conversations outside
their talkgroup. |
¡¡ |
¡¡ |
This feature will stop the
transmission of the two-way radio if the radio is
transmitting for a long duration. |
 |
Compandor |
¡¡ |
 |
Scrambler |
| ¡¡ |
This feature can help improve signal-to-noise ratio,
reduce the background noise and obtain good audio
quality at the receiver. |
¡¡ |
¡¡ |
A technology is used to scramble communications to
prevent other radio users in the vicinity from listening
to your conversations. |
 |
Voice Prompt |
¡¡ |
 |
Power-on Tone |
| ¡¡ |
The radio actually talks to you in a human-like voice.
You will hear the prompt spoken in plain relative
language. |
¡¡ |
¡¡ |
A sound prompt when you turn on the power, which is a
very practical function in dark places or for people
with visual impairments. |
 |
Low Battery Alert |
¡¡ |
 |
Emergency Alert |
| ¡¡ |
This warning reminds that your battery is low and must
be either recharged or replaced. |
¡¡ |
¡¡ |
If an operator needs to send an immediate and urgent
request for help, the push of just one button can
trigger a call for assistance. |
 |
Remote Alert |
¡¡ |
 |
Roger Beep/Talk Confirmation
Tone |
| ¡¡ |
With remote alert your radio can be programmed to
automatically transmit a background sound. |
¡¡ |
¡¡ |
When this feature is activated, a tone is transmitted to
the listener after a transmission. |
 |
1750Hz |
¡¡ |
 |
CTCSS/DCS |
| ¡¡ |
1750Hz is used to connect to the repeater. |
¡¡ |
¡¡ |
CTCSS uses continuous tones below 300 Hz whereas DCS
uses digital data and all encoded words can be used on
the same channel without interference. |